Is Mold a Menace in Your Home? Now There’s A Way
to Find Out For Sure
by ARA
(ARA) – Sick building syndrome has
become such a big problem in the United States in recent years,
it’s a phrase you can now find in the dictionary. It is
defined as an illness characterized by skin irritations,
headache, and respiratory problems
that is caused by indoor pollutants, inadequate ventilation,
and microorganisms, which include mold.
Toxic molds have been making people sick since biblical times,
but the scope of the problem really came to the forefront in
1996 when tests by the Centers for Disease Control (CDC)
revealed the probable cause of the mysterious illness that
killed one infant and sickened nine others at a Cleveland,
Ohio, housing project. The babies, who lived within close
proximity to one another, all suffered from the same rare lung
disorder characterized by pulmonary hemorrhaging. The likely
cause: Stachybotrys chartarum, a greenish-black mold. It was
found in every one of their homes.
In recent years, the same toxic mold has been responsible for
countless other incidents of sick building syndrome at schools,
public offices and even single family homes. “Part of the
problem is our current construction practices,” says Seth
Norman, CEO of Walled Lake, Mich.-based Mold Free, a nationwide
mold inspection and remediation service. “We close our
buildings tight to make them energy efficient, and as a result,
building materials exposed to moisture never get a chance to
dry out.”
Burst or leaking plumbing, leaking roofs, ground water seepage,
water and flood damage can cause thousands of different types
of molds, bacteria, mildew and even black mold to grow on
fiberboard, gypsum board, paper, dust, and lint.
Visible mold can be cleaned off surfaces with a weak bleach
solution. Mold under carpets typically requires that the
carpets be removed and replaced, but what do you do about mold
in the insulation or wallboard? It goes without saying, they
too have to be replaced, but how do you know you have a mold
problem behind your walls?
“That’s the first place we look if there aren’t any other
visible signs of what’s making someone sick in their home,”
says Norman. Signs of mold exposure include nasal stuffiness,
eye irritation, wheezing, fever and even shortness of breath.
People with chronic illnesses, such as obstructive lung
disease, may develop mold infections in their lungs.
Depending on the size of the building, Norman’s company charges
between $500 and $2500 to conduct an environmental assessment.
“The high cost prohibits a lot of people from going through
with the testing,” says Norman. “We saw there was a need for an
inexpensive testing tool, so we developed one.”
IMS Laboratory’s Mold Test Kit, which retails for $9.95 plus
the cost of shipping, comes complete with easy to follow
instructions for testing your home or office environment. It is
the only home testing kit approved by the National Association
of Mold Professionals, a non-profit organization established
with the goal of developing and promoting the Mold Inspection
and Remediation industry.
“The kit can be used three different ways: it can take a direct
topical sample; it can be taped to an air vent to test your air
duct system, or simply exposed to the air in a suspect room.
Once the test is complete, you seal it in the enclosed bag and
place it in a dark, warm place for two to three days,” says
Norman. “After the required time elapses, look at the plastic
container inside and if you see anything growing your
environment has tested positive for mold. You then have the
option of sending the kit to our laboratory to have the type of
mold identified.” There is a $29.95 fee for laboratory
analysis.
For more information about the health problems associated with
toxic mold, and signs to look for to determine its presence in
your home, log onto www.homemoldtestkit.com. Mold Free test
kits can either be ordered online or by calling (877)
665-3373.
Courtesy of ARA Content
About the author:
Courtesy of ARA Content
|